The PM20 fuel cell test station is designed for the development and research of PEM fuel cell stacks ranging from 1 to 20 kW. This station is capable of controlling the flow, pressure, temperature, and humidity of the anode, cathode, and cooling loops of a fuel cell stack. It simulates operational conditions and collects comprehensive data from the stack.
*Customized products, please send your requirements to info@tensortechs.com
● Anode/Cathode Flow Rate, Stoich, Temperature, Humidity and Pressure Control
● Dry/Wet Gas Switching
● Estop and Manual Nitrogen Purge
● Rapid Heating and Humidification of The Stack
● Polarization Curves and Other Functional Tests
● Cell Voltage Monitoring
● Intrinsic Safety & Alarming System
● HMI with Data Acquisition & Analysis
● 24/7 Unattended Operation
●Rapid Humid
●Dynamic Pressure
●Anode Dead-end
●Cold Start
●Water Balance
| Min P/kW | Max P/kW | H2/NLPM | Air/NLPM | Inlet DP/°C | Gas Temp/°C | Coolant/LPM | Current/A | Cell# | Stack Temp/°C | Gas Pressure /kPag | Cell Hardware | Endplate Heating | 0V Operation | Cell Reverse | EIS | HFR | Rapid Humid | Dynamic Pressure | Active Cooling | Anode Deadend | Cold Start | Water Balance |
| 1 | 20 | 500 | 1500 | 90 | 100 | 60 | 1000 | 80 | 90 | 300 | O | O | O | O | O |
English
